What bandsaw blade do I need for cutting GRP?

A grit-edge blade with no conventional teeth. The glass fibres in GRP blunt toothed blades quickly and the resin clogs their gullets, so the reliable choice is a Dakin-Flathers Saw37GRIT band coated in tungsten carbide grit or diamond, welded to the length your machine needs.

Will an ordinary woodworking blade cut carbon fibre?

It will make a few cuts, but carbon and glass fibres are abrasive enough to dull ordinary teeth quickly. Once dull, the blade tears the weave and delaminates the edges. A toothless grit edge grinds through the layup instead, so cut quality holds up over long production runs.

What blade stops frayed edges when cutting composite panels?

Fraying is usually a blunt toothed blade hooking fibres out of the resin. A toothless grit edge has nothing to snag the weave: the coated edge grinds fibre and resin through together, so panels come off the saw with cleaner edges that need less finishing.

Material guide

Bandsaw blades for GRP and composites

Glass and carbon fibres blunt conventional teeth in minutes. The blades that last are toothless: Dakin-Flathers grit edges coated in tungsten carbide or diamond grind through GRP, carbon fibre layups and laminates without snagging the weave.

Shop grit and diamond-coated blades Find my blade

The problem with cutting grp and composites

Glass-reinforced plastic is a blade killer by design. The fibres that give it strength are hard and abrasive, so every pass drags them across the tooth tips of a conventional blade. The edge dulls fast. Once it stops shearing cleanly the blade starts to rub. Rubbing generates heat, the resin softens and the gullets pack solid with sticky dust. A clogged blade cuts slower, runs hotter and wanders in the kerf.

The workpiece suffers with it. Blunted teeth stop cutting fibres and start hooking them, pulling strands out of the matrix and lifting plies apart. Carbon fibre layups and laminates fray at the exit face, so a cut that started clean finishes ragged.

A grit edge sidesteps all of this. With no teeth to blunt and nothing to hook the weave, tungsten carbide or diamond particles simply grind a kerf straight through fibre and resin together. The edge wears gradually rather than failing suddenly, so the cut quality stays consistent from the first metre to the last.

Recommended blades for grp and composites

Constructions and ranges from the manufacturers' published data, with the honest reason each blade makes the list. Every one is welded to your machine's length.

Recommended blades for grp and composites, drawn from the manufacturers' published ranges. Prices are from prices per welded loop, ex VAT, at the narrowest width and shortest length.
Blade	Construction	Width range	Why this blade	From price
Saw37GRIT Diamond Bandsaw BladeDakin-Flathers Saw37GRIT	Steel band edge-coated in tungsten carbide grit or diamond, no conventional teethGrit and Diamond-Coated Blades guide	13mm to 38mm	The diamond-coated edge has no conventional teeth to blunt, grinding through GRP and other materials that would destroy a toothed blade.	From £84.00 ex VATsample pricing
Saw37GRIT Tungsten Carbide Bandsaw BladeDakin-Flathers Saw37GRIT	Steel band edge-coated in tungsten carbide grit or diamond, no conventional teethGrit and Diamond-Coated Blades guide	6mm to 38mm	Tungsten carbide grit on a toothless steel band cuts GRP cleanly and is the economical grit choice for abrasive work short of glass-hard materials.	From £54.00 ex VATsample pricing

Getting the cut right

General rules that hold across machines. Exact widths, pitches and options are on each product page.

Choose the right grit edge
Both edges cut GRP, so choose on the wider job list. Tungsten carbide grit is the economical option for abrasive work short of glass-hard materials and also handles graphite, cast iron and wire-reinforced rubber. Diamond suits mixed workloads that take in glass, industrial ceramics and silicon materials alongside your composite cutting.
Feed lightly and steadily
A grit edge grinds its way through rather than shearing chips, so it will not respond to force the way a toothed blade does. Feed with steady, light pressure and let the abrasive set the pace. Pushing harder only builds heat, softens the resin and smears the cut face.
Manage heat and dust
Composite dust is abrasive to the machine and unpleasant to breathe, so run extraction at the cut and keep guides and wheels clean. Heat is the other enemy: it softens the resin and loads the edge. Pause on long cuts if the workpiece gets hot and let the band clear itself.
Support the laminate
Laminates fail at the exit face first, so support thin panels close to the cut line and keep the blade guides set close to the work. Correct band tension matters as much as on any blade: a slack band wanders in the kerf and a wandering cut frays the plies.

Suggested image

Action shot: recommended blade cutting grp and composites, cut face visible

materials/grp-composites/cutting

Industry guide

Stone, Glass, Ceramics and Composites

Cutting grp and composites for a living? The industry guide maps the whole workload, not just this material.

Read the guide

Other material guides

Frequently asked questions

Tell the wizard your machine and length and it will match grp and composites to a blade that fits.

Find my blade